RAISED TABLES AND JUNCTIONS: COMBINATIONS
The versatile and cost-effective way to create a table or junction with Traficop ramp, corner and side modules - creating a 'picture frame' to be infilled with Dense Bitumen Macadam (DBM) or similar, typically 50mm as a base and 25mm as wearing course.
The weight of the base course (in tonnes) is the area of the infill (in m2) divided by 10 and for the wearing course, the area divided by 20. With tapered sides the length of the table is available in increments of 1000mm and the width in increments of 100mm.

RAISED TABLES: RUBBER
Reflective markings and anchor system for raised traffic tables.
Reflective markings are moulded-in at the time of manufacture.
Fixing system with unique RediPlug nylon and stainless steel coach screw and washer.
For an easily Relocatable solution, Rediweld supply a complete construction using rubber modules to suit tables, kerb to kerb or with tapered sides. Tables are available with flat top height of 75 and 65mm and width increments of 100mm.

| Model | Flat top length | Overall length | Speed guidance |
| Estate | 0.8m | 2.0m | 15 mph |
| Junior | 1.8m | 3.0m | 20 mph |
| Standard | 2.8m | 4.0m | 25 mph |
| Major | 3.8m | 5.0m | 25 mph |
Interative CAD Drawings
Raised Table 65mm Tapered sides 5.6m wide x 4.0m long
Combination Table 75mm Kerb to Kerb
You will need E-drawings viewer to see these:-
Technical Drawings

Combination Raised Table Kerb to Kerb 75mm
Combination Raised Table Tapered Sides 75mm







